F+Serie Vertikal – the space-saving alternative
Drives with ball screws (with dirt deflector) and tapered roller suspension
Controlling software „Penta-Tec“ with drawing functions, contour calculations, DXF, s4m, G-code import and 3D processing and also automatic levels and mill with assignment via a DXF
vacuum table – 15mm aluminium, milled as a „basket weave“ and seperating in four areas which are reachable with ball valve
Y-axis protected by a gaiter for dirt
length measuring button for milling measurment is integrated
Laser for an easy approching of a zero point
suction device
Ease of use
With the new machine you can produce immediately after delivery.
The software „Penta-Tec“, which is only developed for Harmuth CNC Frästechnik, is easy to use and provides many defaults for standard of the advertising technique.
After the opening of a simple text document, the system creates the milling marks and numbering automatically.
Also the cooperation with Rib-softwares, f.e. Cologate, is function flawlessly. Simple letterings for advertising structures or boards or also free forms can be createed of every NE-materials.
Built in technology :
- drive trains with ball screw (20 x 20mm X/Y and 16 x 5mm for Z-axis)
- drive system stepper motors (Closed Loop System)
- y-axis protected with a gaiter
- speed of positioning X/Y 9m/min, Z 6m/min
- control electronics in a cabinet of steel directly built at the machine
- connection to the computer with EtherCad
- 2 configurable jacks outlet f.e. For vacuum
- 1 jack by On and Off main switch controlling computer
- speed-controlled milling spindle adjustable via software
- regulated vacuum pumps can be controlled (small parts = high pressure / large parts = low pressure)
- suction device
- linear measuring button integrated
- vacuum table divided into zones
- height measuring for table leveller
- machine controlling software „Penta-Tec“ with easy of use and many automatic functions
- Drawing functions, contour calculations, DXF, s4m and G-code import, 3D processing, automatic levels and mill assignment of a DXF
- Height measuring of the table (correction of the table of the machine)
- software calculated the vacuum pressure, big parts = small pressure, small parts = big pressure (only by regulated vacuum pump)
- drive train
- drive trains with ball screw (20 x 20mm X/Y and 16 x 5mm for Z-axis)
- drive system stepper motors (Closed Loop System)
- y-axis protected with a gaiter
- speed of positioning X/Y 9m/min, Z 6m/min
- Mechanics and electronics
- control electronics in a cabinet of steel directly built at the machine
- connection to the computer with EtherCad
- 2 configurable jacks outlet f.e. For vacuum
- 1 jack by On and Off main switch controlling computer
- speed-controlled milling spindle adjustable via software
- regulated vacuum pumps can be controlled (small parts = high pressure / large parts = low pressure)
- Components
- suction device
- linear measuring button integrated
- vacuum table divided into zones
- height measuring for table leveller
- Software
- machine controlling software „Penta-Tec“ with easy of use and many automatic functions
- Drawing functions, contour calculations, DXF, s4m and G-code import, 3D processing, automatic levels and mill assignment of a DXF
- Height measuring of the table (correction of the table of the machine)
- software calculated the vacuum pressure, big parts = small pressure, small parts = big pressure (only by regulated vacuum pump)
F+Serie Vertikal – overview :
| Machine | External dimensions | Working area | Speed of positioning (m/min)* | |
| X x Y x Z | X x Y | Z | ||
| F+2000 Vertikal | Lenght=3750mm, depth=600mm (1200mm with portal), height=2300mm | 2100 x 1560 x 170 mm * | 9 | 6 |
| F+3000 Vertikal | Lenght=4750mm, depth=600mm (1200mm with portal), height=2300mm | 3150 x 1560 x 170 mm * | 9 | 6 |
| F+3000-2 Vertikal | Lenght=4750mm, depth=600mm (1200mm with portal), height=2800mm | 3150 x 2060 x 170 mm * | 9 | 6 |
| F+4000-2 Vertikal | Lenght=5500mm, depth=600mm (1200mm with portal), height=2800mm | 4150 x 2060 x 170 mm * | 9 | 6 |
*at 3m machine with driven spherical nut at X
Standard equipment :
Suction device
Suction device
Our machines include a suction system (without vacuum cleaner)
Vacuum table
Vacuum table
Vacuum table manufacture of cast aluminium. Because of the vacuum the material will be sucked in and prevented, that the building parts slip out of position during milling. The vacuum areas can be configurated by ball valves.
Permanently installed control computer
Permanently installed control computer
An industrial computer installed in a control terminal with a built-in touch screen 21``, TwinCat operating system with Windows, Machine control software ``Penta-Tec`` with very simple operating functions and many automatic functions, drawing functions, contour calculations, DXF, s4m and G-code import, 3D processing, automatic plane and milling cutter assignment from a DXF
Tool lenght sensor
Tool lenght sensor
determines the z-zero point.
After clamping the milling cutter, the z-height is automatically corrected to table height via the measuring probe. Another measuring is not more necessary.
Optional equipment :
Tool changer
Tool changer
The tool changer is completely hidden under the table. 10 to 14 tools (or double tool changers) are stored here, which are automatically utilised
Fiducial recognition camera
Fiducial recognition camera
camera system for recognition of fiducial marks and correction of milling data. (This system is integrated in our software – there will not installed a second software)
Vacuum pump Busch Mink MV 0312B
Vacuum pump Busch Mink MV 0312B
60 Hz, 345 m3 / h, 850 mbar, 6.5 kW
Very quiet (69dB) regulated by a frequency converter. Extremely energy-saving through software control.
large parts = low pressure
small parts = high pressure
Reduced pressure can be activated if milling is not performed
LED light bar
LED light bar eXtreme-Line
6000k white matt diffuse SMD LEDs
The perfect work lighting
Cross laser
Cross laser
For simple, optical determination of a zero point. The cross laser enables more precise, manual approach to a desired position. With the software, the position can be defined as a zero point.
Vacuum pump Becker 4kW
Becker SV 8.190 / 2-48 Pressure-regulated vacuum pump 4kW
175m3 / h -380 mbar
up to 100hz
4.0 kW
Frequency-controlled and via software
large parts = low pressure
small parts = high pressure
Idustrial vacuum
Idustrial vacuum
Cheap industrial vacuum. Ideal for advertising technican. Not recommend for continuous operation. Vacuum sucker with carbon brushes. 3X1200 Watt, 80 Litre, 270mbar. Optimal for plastics and aluminum processing.
T-slot table
T-slot table
The perfect supplement and assistance for clamping workpieces.
Point laser
Point laser
For simple, optical determination of a zero point. The point laser enables more precise, manual approach to a desired position. With the software, the position can be defined as a zero point.
Vacuum pump Becker 4,8kW
Becker SV400 / 2 pressure-regulated vacuum pump 4.8kW - two-stage
235m3 / h -400 mbar
60hz
4.8 kW two-stage
Frequency-controlled and via software
large parts = low pressure
small parts = high pressure
Idustrial vacuum profi
Idustrial vacuum profi
Optimal for plastics and aluminium processing
- Recommend for continuous operation
- Very quiet
400V, 3kW, 100 Litre, 310mbar
- More pumps connectable
Trolley N1100 700A
Trolley N1100 700A
Milling spindles :
HSD milling spindle MT 1073 (24.000U/min)
HSD milling spindle MT 1073 (24.000U/min)
Manual change of tools, 24, 0 00 rpm, 1.1 kW, 300 - 24, 0 0 0 rpm w ith frequency converter (speed is controlled by the software), complete set of colletses
Milling spindle Teknomotor (1,1kW, 24.000U/min)
Milling spindle Teknomotor SK 20-ER16 (1,1kW, 24.000U/min)
Pneumatic tool change
24.000 U/min | 1,1 kW | 230 V
Steel bearing, ``tool clamped`` sensor
clamping range from 3 to 10 mm
The speed is controlled by software
Milling spindle Teknomotor (2,2kW, 24.000U/min)
Milling spindle Teknomotor SK 20-ER16 (2,2kW, 30.000U/min)
Pneumatic tool change,
30.000 U/min | 2,2 kW | 230 V
Ceramic bearing, ``tool clamped`` sensor
Clamping range from 3 to 10 mm
The speed is controlled by software
No suitable spindle for you ?
At the customer’s request, we also install spindles from other manufacturers
(no stock items)
Conical holders :
SK 20 - clamping range: 3-10 mm
Cutting tools – application via C-axis
A module for different tool types including a quick-change system
(Attention: the whole work area cannot be used)
Standard module tangential knifes
Standard module tangential knifes
Controlled via the C-axis.
Tangential knife for cutting rubber, kappa, cardboard, magnetic foil, soft plastics or similar materials.
The knife is controlled tangentially via a 5th axis.
Caution: The entire work area cannot be used!
Extension module oscillating knifes
Extension module oscillating knifes
Controlled via the C-axis.
For cutting cardboard, rubber and similar materials.
The knife is controlled tangentially via a 5th axis and driven by compressed air to 9,000 strokes / min with a 9mm strake.
Caution: The entire work area cannot be used!
Extension module scoring wheel ( different wheels available)
Extension module scoring wheel ( different wheels available)
For creasing e.g. cardboard boxes and soft plastics.
Caution: The entire work area cannot be used!
